Back to
humble Till Help Center

Setting Up Your Brother Label Printer On Windows:

Please follow the below steps to enable your Brother QL720 NW Label Printer to connect to your WiFi network via Windows.

Insert the Installer CD into your CD-ROM Drive. If your model name screen appears, choose your printer. If the language appears, choose your language.

Unable to insert the Brother CD into your laptop ? Visit here to download drivers directly to your PC/ Laptop.
Click on Standard Installation.

Read the License Agreement and click Yes, if you agree with the Terms and Conditions.

Click on Install to start the Installation Process and follow the on screen instructions.
Choose the Wireless Network Connection and click on Next.
Choose the Brother Peer-to-Peer Network Printer and click on Next. 

When this screen appears, choose "Change the Firewall Port Settings to enable network connection and continue with the installation" then click Next.

Click  "Yes, I have a USB cable to use for installation" followed by clicking on Next.

If the Important Notice box appears, be sure to read the notice and tick the box once you have confirmed your WiFi Name and Password.

 Temporarily connect the USB Cable from your PC to the Printer.

It will search for any available networks from your printer. Click on the WiFi Name that you made a note of in Step 9.


Enter in the Password that you made note of in Step 9.

Confirm the WiFi Settings and click Next. These settings will be sent to your printer.


Once complete, navigate to and click on the humble Till App followed by clicking on Settings.

Click on General Settings and scroll to the bottom of the page and ensure that Use Label Printer is ticked.


You will be prompted by a Pop Up window.


You are now able to print barcode labels for your products via the humble Till App.

To test that you are able to print a barcode.

Navigate to the Settings Tab on the humble Till App followed by clicking on Products. Click on the first product on your list. If you are able to print barcodes using your Barcode Label Printer, there will be an Action Key in the Top, Centre of your screen. Click and choose "Print Labels" followed by the amount of Labels you would like to print. 
If you have nay questions or need help with anything, please do not hesitate to contact our support team on
Was this article helpful?
0 out of 0 found this helpful


Article is closed for comments.